Zero Smog 4V Kit 2 230V F/G

Zero Smog 4V Kit 2 230V F/G

Fume extraction Zero Smog 4V with Kit 2 Funnel

  • Unit purifies air at up to 4 workplaces
  • Constant Flow Control (CFC) guarantees automatical air flow regulation for each working place independent of the connected workplaces
  • Electronic filter control with optical and acoustical filter alarm
  • Efficiency test via USB port
  • Fume extraction Zero Smog 4V with Kit 2 Funnel
  • 4 wheels to allow easy movement of the unit
  • Low noise level
  • Remote control via RS 232 port
  • 4 kits available
Add to quote

Zero Smog 4V Kit 2 230V F/G

Fume extraction Zero Smog 4V with Kit 2 Funnel

  • Unit purifies air at up to 4 workplaces
  • Constant Flow Control (CFC) guarantees automatical air flow regulation for each working place independent of the connected workplaces
  • Electronic filter control with optical and acoustical filter alarm
  • Efficiency test via USB port
  • Fume extraction Zero Smog 4V with Kit 2 Funnel
  • 4 wheels to allow easy movement of the unit
  • Low noise level
  • Remote control via RS 232 port
  • 4 kits available
  • The fume extraction unit Zero Smog 4V Kit 2 Funnel is easy to install and operate. It is designed for use as a small central system. The kit is supplied complete with 2 pcs. hose connector, flexible hose, flexarm , funnel nozzle, valve and bracket, ready for installation at the workplace. A powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230 m3/h. With setting constant flow control the adjustable turbine speed avoiding unnecessary waste of suction power and saving energy.

 

Dimensions W x D x H (mm) 345 x 325 x 505
Voltage 220 – 240 V, 50/60 Hz
Heating output 275 VA
Noise level (distance 1 m) dB(A) < 48
WX compatible yes
Dimensions W x D x H (inch) 13,58×12,79×19,88
Weight (ca) in kg 19
ESD-safe yes
Max. capacity 1-4 workplaces
USB interface yes
Pre filter Pre filter mat class F7
Max Turbine Vacuum (Pa) 3.800
Compact filter Particle filter H13, Wide band gas filter (50 % Active carbon + 50 % Chemisorb)
USB The USB port can be used to load firmware updates, run efficiency tests and log data. Do not leave the USB medium inserted for longer than 2 minutes. After this time expires, the USB module will switch off automatically.
Interface RS232 (Remote control) All system functions can be operated and remotely monitored via the RS232 port.
Capacity m³/h 230
Fuse T1,6A
WT compatible yes
Air consumption l/min na
SKU T0053664699N
Brands

Scroll to Top