Zero Smog 4V Fume Extraction 230v
Fume extraction unit Zero Smog 4V
- Unit purifies air at up to 4 workplaces
- Constant Flow Control (CFC) guarantees automatical air flow regulation for each working place independent of the connected workplaces
- Electronic filter control with optical and acoustical filter alarm
- Efficiency test via USB port
- 4 wheels to allow easy movement of the unit
- Low noise level
- 4 kits available
- The fume extraction unit Zero Smog 4V (ZS 4V) is easy to install and operate. It is designed for use as a small central system. A powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230 m3/h. With setting constant flow control the adjustable turbine speed avoiding unnecessary waste of suction power and saving energy.
| Dimensions W x D x H (mm) | 345 x 325 x 505 |
| Voltage | 220-240 V (50/60 Hz) |
| Heating output |
275 VA
|
| Noise level (distance 1 m) dB(A) | < 48 |
| WX compatible | yes |
|
Dimensions W x D x H (inch)
|
13,58×12,79×19,88 |
| Weight (ca) in kg | 19 |
| FT applications | Manual soldering |
| FT applications | Significant formation of solder fumes |
| FT applications | Fine dust |
| FT applications | Methyl ethyl ketone (MEK) |
| FT applications | Solvents |
| FT applications | Adhering, cleaning, casting |
| ESD-safe | yes |
| USB interface | yes |
|
USB
|
The USB port can be used to load firmware updates, run efficiency tests and log data. Do not leave the USB medium inserted for longer than 2 minutes. After this time expires, the USB module will switch off automatically. |
|
Interface RS232 (Remote control)
|
All system functions can be operated and remotely monitored via the RS232 port. |
|
Max Turbine Vacuum (Pa)
|
3.800
|
|
Compact filter
|
Particle filter H13, Wide band gas filter (50 % Active carbon + 50 % Chemisorb)
|
|
Max. capacity
|
1-4 workplaces |
|
Pre filter
|
Pre filter mat class F7
|
|
Capacity m³/h
|
230
|
|
Fuse
|
T1,6A
|
|
WT compatible
|
yes |
|
Air consumption l/min
|
na |
|
SKU
|
T0053660699N
|
