Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and the environment. Most people thought that the move to leadfree soldering would be more nature friendly. In reality lead-free soldering smoke emissions contain more breathable fine dust particles. More and smaller particles are produced due to the higher working temperatures required and because more flux is used in the soldering process. In many countries legal regulations governing clean air in the work place require that hazardous substances are removed from the air in order to avoid harmful effects on people and machines. It is important to use the correct safety equipment to remove these hazardous substances. Fine particles are more dangerous to inhale than big particles as they get caught more easily and block the alveoli in the lungs. To protect the operator it is important to use an extraction system that is able to separate these particles and gases and then re-circulates the cleaned air back into the work place. This saves energy and reduces energy costs.
In general yes, for detailed information please contact the local application support.
Depending on the consumption the pre filter needs to be changed when the suction capacity is low (optical or acoustical signal). If the filter indication is still on after the pre filter is changed, the main filter has to be replaced.
Based on the CAS-No.in the MSDS we can check whether the filter can handle the substances or not. To give a statement regarding lifetime we need to know the monthly / yearly consumption of the chemicals / substances.
Each arm is suitable for every unit in the Zero Smog Line. For more information ask your local application support.
The required airflow is between 180 m³/h and 230 m³/h. 1 x Zero Smog 6V, or alternative 2 x MG100S are recommended. Since the CBC-A is mostly used for gas applications (filling, cluing, cleaning, etc.), a unit with a large gas filter is recommended.
It depends on the consumption of solder wire. For an efficient gas filtration the filter should be changed after 1 year at the latest. For chemicals, the lifetime varies widely, depending on the type of chemicals/substances.
Warranty 1 year on production defects, excluding consumables (filter, hoses, sealings, etc.)
Constant Flow Control
Intelligent control systems for maximum performance
If not all workstations in WellerFT extractor units with multiple workstations are in operation, then electronic throttle valves close the workstations which are not required. The adapted power output of the turbine regulates the extraction volume. The automatic flow control system maintains a constant air flow to ensure optimal performance during work operations. Energy consumption is adapted accordingly and the costs reduced.
In addition, the performance of multiple-stage filtration systems tends to drop off even when only one filter is clogged. The intelligent constant flow control system counteracts this decrease in output. It indicates filter changes in advance by acoustic and visual signals and simultaneously increases the power output of the low-maintenance turbine in order to ensure a constant extraction volume. This ensures absolute 100 percent efficiency of WellerFT tools throughout work operations.
90 minutes soldering with leadfree solder wire
-
Soldering Fume Extraction
Zero Smog TL KIT1 WF Funnel 230V F/G
