Zero Smog 4V Kit 2 230V F/G
Fume extraction Zero Smog 4V with Kit 2 Funnel
- Unit purifies air at up to 4 workplaces
- Constant Flow Control (CFC) guarantees automatical air flow regulation for each working place independent of the connected workplaces
- Electronic filter control with optical and acoustical filter alarm
- Efficiency test via USB port
- Fume extraction Zero Smog 4V with Kit 2 Funnel
- 4 wheels to allow easy movement of the unit
- Low noise level
- Remote control via RS 232 port
- 4 kits available
- The fume extraction unit Zero Smog 4V Kit 2 Funnel is easy to install and operate. It is designed for use as a small central system. The kit is supplied complete with 2 pcs. hose connector, flexible hose, flexarm , funnel nozzle, valve and bracket, ready for installation at the workplace. A powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230 m3/h. With setting constant flow control the adjustable turbine speed avoiding unnecessary waste of suction power and saving energy.
| Dimensions W x D x H (mm) | 345 x 325 x 505 |
| Voltage | 220 – 240 V, 50/60 Hz |
| Heating output | 275 VA |
| Noise level (distance 1 m) dB(A) | < 48 |
| WX compatible | yes |
| Dimensions W x D x H (inch) | 13,58×12,79×19,88 |
| Weight (ca) in kg | 19 |
| ESD-safe | yes |
| Max. capacity | 1-4 workplaces |
| USB interface | yes |
| Pre filter | Pre filter mat class F7 |
| Max Turbine Vacuum (Pa) | 3.800 |
| Compact filter | Particle filter H13, Wide band gas filter (50 % Active carbon + 50 % Chemisorb) |
| USB | The USB port can be used to load firmware updates, run efficiency tests and log data. Do not leave the USB medium inserted for longer than 2 minutes. After this time expires, the USB module will switch off automatically. |
| Interface RS232 (Remote control) | All system functions can be operated and remotely monitored via the RS232 port. |
| Capacity m³/h | 230 |
| Fuse | T1,6A |
| WT compatible | yes |
| Air consumption l/min | na |
| SKU | T0053664699N |
