PCBs are separated carefully and quickly, off-cuts are removed precisely and smoothly. A two-part matrix enables the different blades to be assembled resp. exchanged easily. Off-cuts are punched out with the help of a compressed air cylinder. The operating pressure can be set on the unit.
Safe operation with HEKTOR 2
PCBs are positioned with their milled groove over the blade onto the matrix. The off-cut is fed below the punch blade. A foot switch triggers the punching and the off-cut is collected in the bottom tool.
T blade: to punch out off-cuts on the right and left margins. Turning the PCB is not necessary
L blade: used with small distances between the off-cuts
Matrix: included in the scope of delivery
| Technical data | HEKTOR 2 |
|---|---|
| Separation method | Punch blade |
| Operation | manual |
| PCB thickness | up to 2.5 mm |
| Air pressure supply | 1/4″ coupling socket |
| Operating pressure, typical | 4 bar |
| Temperature / humidity Operation Temperature / humidity Stock Temperature / humidity Transport |
+ 10 – 35°C / 10 – 85 % not condensing 0 – 60° C / 20 – 80 % not condensing – 25 – 60°C / 20 – 80 % not condensing |
| Width x Height x Depth | 220 x 170 x 255 mm |
| Weight | 2.7 kg |
| Approvals | CE, FCC Class A |
