Quote Request List
Menu
Quote Request List

PCB separator MAESTRO 5L

PCB separator MAESTRO 5L | When large numbers of pre-scored PCBs need to be separated

It can be used economically when large quantities of milled PCBs have to be separated.

Up to 15 PCBs arranged next to one another can be separated simultaneously. 310 mm is the maximum passage width.

The distances and the number of circular blades are adapted to the PCB. Solid and precisely manufactured blade shafts ensure smooth PCB separation. The hardened and ground and titaniumcoated circular blades achieve a high running performance.

Add to quote
Category

It can be used economically when large quantities of milled PCBs have to be separated. Up to 15 PCBs arranged next to one another can be separated simultaneously. 310 mm is the maximum passage width. The distances and the number of circular blades are adapted to the PCB. Solid and precisely manufactured blade shafts ensure smooth PCB separation. The hardened and ground and titaniumcoated circular blades achieve a high running performance.

PCBs are inserted to the guide manually or are fed automatically by a loader resp. an external conveyor belt. When separated, the PCBs are deposited on the built-in conveyor belt. A SMEMA interface provided, installation in an assembly line is possible (for information see the operator’s manual). With the help of a base frame vertically adjustable, MAESTRO 5L can be adapted to any application. A possibility to connect an extraction and filter device is in preparation.

 

Outside dimensions increased
after separation: typically 0.2 mmThe milled groove may be interrupted by cutouts.

 

 

Technical data Maestro 5L
Separation method Component side: Circular blade
Solder side: Circular blade
Operation motor-driven
Separation speed 100 – 220 mm/s to be set in ten steps
PCB length
light barrier activated
light barrier deactivated		 100 – 570 mm
up to 2,000 mm
PCB width up to 310 mm
Residual off-cut width at least 3 mm
Component height Component side up to 30 mm
Solder side up to 10 mm
Number of circular blades up to 16 per blade shaft
Programming
  Display
  • Separation speed
  • Separation length resp. number of PCBs
  Control buttons
  • Start, Stop, Reverse
  Programming buttons
  • Separation speed setting
  Monitoring
  • Detection of separation length
  • Accumulation before / behind the blades
  • Conveyor belt finally stopping
  Interfaces
  • external start / stop
  • SMEMA (round, 14 pins)
Power supply 230/115 VAC, 50/60 Hz
Temperature / humidity   Operation
Temperature / humidity   Stock
Temperature / humidity   Transport		  + 10 – 35°C / 10 – 85 % not condensing
0 – 60°C / 20 – 80 % not condensing
– 25 – 60°C / 20 – 80 % not condensing
Width x Height x Depth 440 x 750 – 1,000 x 1,100 mm
Weight 63 kg
Approvals CE, FCC Class A

Related products

Scroll to Top