Packing workstation is an adjustable ergonomic workstation that helps to easily access all packaging materials – cartons, tape, paper, bubble wrap or others. Lately it is important to meet quickly growing demand of packing and logistics needs, which means that the workstation needs to be as ergonomic and efficient as possible. All the materials used along the process of packing the goods need to be easily accessible – right at the packer’s fingertips. Packing workstation provides ergonomic access to paper, tape, and cartons so time is spent working, not bending, stretching or reaching for materials
Basic part of Packing workstation is the SR workbench. These workbenches can be placed in a line to make a common working area with no gaps. Universal design allows fitting out the workplace with necessary equipment and drawer units.
Height adjustment: 650-950 mm
Load capacity: 300 kg
Temperature resistance: 300°С
| Code | Dimensions |
|---|---|
| SR-15-9 | 1500х900 mm |
| SR-18-9 | 1800х900 mm |
Read more about additional modules
DL/A Workbench lighting
4 DL/A Workbench lighting DL/A Workbench lighting is placed in an aluminum case with 2 energy-efficient luminescent 54 W lamps, light direction regulation and shadowless reflector provided. Quick switching on without shimmering, no strobing freeze.
- Length: 1200 mm
- Height adjustmentable 500 mm – 1350 mm
- Illuminance at 1000 mm distance: 1200 lux central
EP Power panel/ 1/2 EP power panel
Basic configuration consists of 4 sockets placed in aluminium case with protective contact and 3 m cable. Panel can be equipped with additional sockets, earth leakage circuit breaker, automatic fuse and a phone jack.
- Nominal load capacity: 10 A
- Grounding cord cross-section: 0.75 mm
PO Main shelf
Rear racks included.
- 2 versions: 30 cm depth and 40 cm depth
- Height adjustment: 1000 — 1800 mm
- Load capacity: 50 kg
DL/S2 Workbench LED lighting
The case for lighting unit is made of aluminum, light direction regulation provided. Available in 2 versions: standard LED lighting, lighting with dimmer.
- Light source: LED lamps
- Light flux: 5985 Lm
- Power consumption: 43 W
- Height adjustable: 500 mm – 1350 mm
D-PO shelves dividers
Available in 2 versions: 300 and 400 mm deep.
DL/N2 Under-shelf local lighting
Additional local LED lighting can be mounted to any workbench series Main Shelf and Perforated panel. Provides uniform illumination level. Available in 2 versions : 60 and 90 cm.
PFP Perforated panel/ 1/2 PFP half-size perforated panel
Panel can be equipped by different holders for additional equipment and tools storage.
DL/N2 Under-shelf local lighting
Additional local LED lighting can be mounted to any workbench series Main Shelf and Perforated panel. Provides uniform illumination level. Available in 2 versions : 60 and 90 cm.
RD/2 lower rolls holder
A holder that helps to locate rolls of paper, film or bubble wrap below the tabletop
RD upper rolls holder/ 1/2 RD half-size rolls holder
A holder that helps to locate rolls of paper, film or bubble wrap above the tabletop
TPP suspended cabinet for printer with sliding shelf
Storage solution for printer or other equipment. With lower sliding shelf
1/2 PRM protective underlayer for cutting
Protective underlayer that helps to easily cut packaging materials not damaging the tabletop.
