Zero Smog 20T Fume Extraction Unit 230 V / 50 Hz
- Zero Smog 20T Fume extraction
- ZS 20T fume extraction unit 230 V / 50 Hz
- Up to 20 FE soldering irons can be connected
- Electric driven, maintenance free turbine produces the required vacuum
- Mobile unit for central and stand alone applications
- Central installation for 50 mm pipe systems up to 200 m (656 ft.) lenght possible.
- Up to 6 Weller (Fume Extraction) soldering irons can be connected directly to the fume extraction unit Zero Smog 20T. Using the Pipe System 50 (available as accessory) up to 20 FE soldering irons can be supported by the unit. The powerful maintenance-free turbine generates a vacuum of 10.000 Pa and is electronically controlled. Operating hours and filter contamination level are also recorded electronically. The filter system achieves a filtration rate of 99, 95 % as per EN 1822 with a particle size of 0, 16 μm.
- For use with pipe systems up to 200 m (7874 in)
| Dimensions W x D x H (mm) | 450 x 450 x 695 |
| Voltage | 230 V (50/60 Hz) |
|
Heating output
|
530 VA
|
|
Noise level (distance 1 m) dB(A)
|
< 51
|
| Fuse | T 3,15 A |
| WX compatible | yes |
| ESD-safe | yes |
| Max. capacity | 1-20 workplaces |
|
Weight (ca) in kg
|
45
|
|
Dimensions W x D x H (inch)
|
17,7 x 17,7 x 27,3
|
|
USB interface
|
yes |
| Max Turbine Vacuum (Pa) |
10.000
|
| Pre filter |
Pre filter mat class F7
|
| Compact filter | Particle filter H13 and wide band gas filter (50 % active carbon / 50 % Chemisorb) |
| Interface RS232 (Remote control) |
All system functions can be operated and remotely monitored via the RS232 port.
|
| USB |
The USB port can be used to load firmware updates, run efficiency tests and log data. Do not leave the USB medium inserted for longer than 2 minutes. After this time expires, the USB module will switch off automatically
|
| Capacity m³/h |
100
|
| Air consumption l/min |
na
|
| SKU |
T0053670699N
|
